DTR P1
DTR P1
DTR P1
DTR P1

FEATURES OF NGC-3000

An NSR NGC-3000 GNSS Compass works by using carrier-phase differential satellite tracking across multiple antennas to calculate a vessel's true heading. Unlike traditional magnetic compasses, it completely bypasses the Earth's magnetic field, making it immune to magnetic interference, high-latitude errors, or hull steel distortion.

The technology operates through the following mechanisms:

1. Dual-Antenna Moving-Baseline RTK The core of the NGC-3000 is its specialized antenna unit (which houses two distinct NGA300 antennas rigidly fixed along a predefined bar or "baseline").
• Signal Phase Extraction: Both antennas track signals from the same satellites simultaneously.
• Differential Measurement: The system measures the sub-millimeter differences in the arrival time (phase difference) of the satellite radio waves reaching each antenna.
• Vector Triangulation: Because the structural distance (baseline length) between the two antennas is precisely fixed inside the housing, a powerful processor unit (NGC-3000P) calculates a highly accurate three-dimensional vector between them. This vector instantly determines the true orientation (heading) of the ship down to an accuracy of 0.4° RMS.

2. Multi-Constellation Satellite Tracking

To maintain a high heading refresh rate and avoid signal dropouts, the system utilizes multi-frequency, multi-constellation GNSS technology. It continuously tracks satellites across four global networks:
• GPS (L1/L2)
• BDS / BeiDou (B1/B2)
• GLONASS (L1/L2)
• Galileo (E1/E5b)

By observing multiple frequencies from up to dozens of satellites simultaneously, it maintains an uninterrupted baseline solution even during heavy weather or when structures partially block the sky.

3. Integrated Inertial Assistance

When a vessel experiences rapid movement (such as violent rolling or pitch in high seas) or passes beneath a bridge where satellite line-of-sight is temporarily lost, raw GNSS calculations can fluctuate. To prevent this, the internal processor combines satellite data with a Rate of Turn (ROT) gyro sensor. The internal gyro smooths out high-frequency movement, filling in the gaps during brief satellite dropouts to guarantee continuous attitude, pitch, and roll data.

4. Data Processing and Outputs Once the processor determines the vessel's spatial orientation, the data is pushed out instantly:
• The Interface: Real-time navigation data is translated into standard NMEA 0183/NMEA 2000 formats (sentences like HDT for true heading and ROT for rate of turn) and delivered over high-speed RS422 and LAN connections.
• Bridge Integration: This steady streams of information directly feed crucial shipboard systems like the ECDIS (Electronic Charts), Radar/ARPA, Autopilot, and AIS.
• Multi-Function Output: Beyond heading, the device acts as a precise Speed and Distance Measuring Equipment (SDME) system, delivering accurate Speed Over Ground (SOG) and Course Over Ground (COG) metrics

 

    General Specifications

    Approval

    • SMDE Cert : MEDB0000C5T
    • DNV / MED Approved
    • IEC 61023 (2007)
    • IEC 60945, IEC61162-1/-2
    • IEC 62288
    • IEC 62923-1/-2

    Heading Accuracy 0.4° RMS
    Heading Resolution 0.1° ~ 0.0001°
    Tracking Rate of turn Cold start: 60 seconds
    Heading fixing time -40°C to +70°C
    Pitch / Roll Angle GPS L1/L2/L5, BDS B1/B2/B3, GLONASS L1/L2/L3, Galileo E1/E5/E6, QZSS
    Position Accuracy: < 2 m
    Speed Accuracy: < 0.1 m/s
    Max Speed  70 nm/h
    Trip Accuracy:  <0.2 nm/h
    Maximum Trip: 99999.9 nm
    Heading Update Interval: ≥ 20 ms
    Position Update Interval: ≥1 sec
    Data Output Rate: max 50Hz


    Display Section

    Display System: 

     7 inch, color LCD, touch screen operation,
     154(W)×87(H) mm

    Resolution: 800 x 480 dots
    Display Mode DATA (Heading, NAV data), PLOTTER, TURN,
     COMPASS, SATELLITE

 

    Interface

    Output Data:

     3 x IEC 61162-1/IEC 61162-2

    Transmission Speed: 4800/9600/19200/38400 BPS (selectable)
    BAM/INS In/Out: ACN, ALC, ALF, HBT
    Data Sentences:  HDT, THS, ROT, HDG, HDM, DTM, GBS, GFA, GGA, GLL, GNS, RMB, RMC, RTE, WPL,   VBW, VLW, VTG, ZDA

    Environment Condition

    Operating Temperature:

      -20℃~+55℃ (Processor Unit, Display Unit) 
      -25℃~+70℃ (Antenna Unit)

     IP Grade: Antenna Unit: IP66
    Processor Unit / Display Unit: IP22
    Compass Safe Distance:

     Standard Compass: 0.40m, Steering Compass: 0.25m  (Display Unit)

     Standard Compass: 0.25m, Steering Compass: 0.15m (Processor Unit)

    Power Supply DC24V (range 12~36V), 500mA~700 mA
    Size / Dimensions  174 (W) × 81 (H) × 160 (D) mm (Processor Unit)

     264 (W) × 145 (H) ×  83 (D) mm (Display Unit)
     808.2 (W) × 240.1 (H) × 244.4 (D) mm (Antenna Unit)


Standard Accessories in package

  • Processor Unit - NGC-3000P
  • Display Unit - NGC-3000D
  • Antenna Unit - NGC-3000A
  • Installation accessories